Koni Shock Absorbers have been a respected product in the Australian 4WD market for more than 20 years. This reputation was built on the existing product range that has been the choice of motoring enthusiasts for 5 decades. With an ever increasing demand for higher performance and greater choice, Toperformance has introduced 2 additional dampers for 4WD use.

The 90 series "Raid" is the monster. Based on Koni's largest vehicle damper. The development of this shock absorber was initiated by African desert experience. Fitting this damper would be like fitting a V8 in a small car. It can operate in a lazy manner, as the internal pressures and temperatures can be kept low. It is an excellent choice for expeditions to the Canning Stock Route, Simpson Desert etc., especially with heavily loaded vehicles. Fantastic reliability and consistency of performance!

The 90 series has a body size of 70 mm, shaft diameter of 18mm and a piston size of 42mm. This damper is fitted with an internal Hydraulic Rebound Stop and a high temperature Viton seal.

The 88 series "Heavy Track" can be described in a similar way to the 90 but is available at a more modest investment. Again, this damper is excellent at limiting pressures and temperatures. The body diameter is 55mm, shaft size is 16mm and the piston diameter is 36mm.

The main range, represented by the 30 series mono-tube and the
popular 82 series twin tube meets the needs of the vast majority of
4WD owners.

Note.
The 88 & 90 series dampers are available for a limited range of 4WD's. Contact Toperformance for details.

All Koni 4Wd dampers have adjustable rebound.
This adjustment facility is primarily used for restoration of "lost" damping after many tens of thousands of kilometers. It is also an excellent tool for "tuning" the damper if heavier springs are selected or very high loads are carried.


See news page 1